Zalman Z3 Iceberg BlackATX Middle tower computer case blackMinimalistic DesignA minimalistic design inspired by a glacier and its minimal linesAesthetic and FunctionalElegant front design inspired by the glacier ensures a smooth airflow as well as aestheticMaximum Airflow and Ventilation2 pre-installed 120mm ARGB fans (Front x 1, Rear x 1) and optimized ventilation provide quick heat dissipation from the case (Up to 8 fans can be supported)Supports Addressable RGB※ How to control RGB LED- LED colors & patterns can be changed by pressing the LED Button on I/O ports.- Long pressing on the LED Button for 6 seconds, RGB LED will be turn off after blinking twice in white.- Long pressing on the LED Button for 3 seconds, RGB will be synchronized with motherboard after blinking once in white.- Press the LED Button again to desynchronize with motherboard.Fan Specifications (Addressable RGB LED Fan)• Dimensions : 120 x 120 x 25(T)mm• Bearing Type : Hydro Bearing• Max Fan Speed : 1,200 RPM ±10%• Max Airflow : 37.8 CFM• Air Pressure : 0.7mm H2O• Noise Level : 26.4 dB(A)• Life Span : 40,000 hoursEasy-to-use Slide Glass Side Panel & Tempered GlassA thick 4mm tempered glass panel allows for easy viewing of the internal computer components.The tempered glass side panel is protected utilizing an edge guard ensures the tempered glass panel will not slide out of proper placement during installation and removal. This edge guard protects the glass and makes it relatively vulnerable to impact and allows for access with removal of only 2 hand tightened screws.Easy accessible design on top I/O portsZ3 ICEBERG comes with two USB3.0 ports and its I/O port is placed on the right side of the chassis to provide great experience on cable management.Power Button(LED), Reset Button, LED Control Button, Headphone Jack, Microphone Jack, USB2.0 Port, USB3.0 PortsCable-Management-Friendly ChassisCarefully designed chassis to minimize cable management difficulties* Upper I/O port is on the right side with rubber covers applied to unused holes for cable managementTop Magnetic Dust FilterProtects your components and provides unobstructed airflow through dust filtrationBottom Dust FilterProtects your power supply from piling up dustFan SupportFront : 3 x 120mm / 3 x 140mmTop : 2 x 120mm / 2 x 140mmRear : 1 x 120mmBottom : 2 x 120mmRadiator ConfigurationFront : 120mm / 240mm / 280mm / 360mmTop : 120mm / 240mmRear : 120mmSpecificationsModel: Z3 Iceberg BlackMaterials: Steel, Plastic, Tempered GlassWeight: 6.4kgDimensions: 410(D) x 210(W) x 480(H)mmCase Form Factor: ATX Mid-TowerMotherboard Support: E-ATX (~280mm), ATX, mATX, Mini-ITXFans Support: Front 3 x 120mm / 3 x 140mm, Top 2 x 120mm / 2 x 140mm, Rear 1 x 120mmFan(s) Included: Front 1 x 120mm (Addressable RGB), Rear 1 x 120mm (Addressable RGB) ARGB Controller IncludedDrive Bays: 2 x 3.5” (2 x Combo, 1 x Toolless), 4 x 2.5”Radiator Support: Front 120mm / 240mm / 280mm / 360mm, Top 120mm / 240mm, Rear 120mmMax. VGA Length: 315mmMax. CPU Cooler Height: 163mmMax. PSU Length: 210mmPCI Expansion Slots: 7I/O Ports: 1 x Headphone, 1 x Mic, 1 x USB 2.0, 2 x USB 3.0, Power Button, Reset Button, LED ButtonProduct code: Z3 Iceberg Black
- A minimalistic design inspired by a glacier and its minimal lines
- Optimal cooling design with vertical front slit and side air vents
- 4mm thick tempered glass side window
- Supports up to 6 Addressable RGB fans
